Working conditions：
Medium temperature：
low temperature:-20~+70℃
standard model:+15~+70℃
high temperature:+70~+104℃
Environmental temperature：≤50℃
Max.working pressure：1.0MPa
APPLICATION
Horizontal multistage light pumps–CMI mainly applicable for conveying of industrial liquid, such as mineral water soft water pure water clean oil and circula-tion and boosting for other weak chemical-industrial medium. Cold water chiller cooling cycle Water treatment processes Industrial cleaner and dishwasher Water boosting on process Heating and cooling for industrial process Air conditioning system Air freshening heater device(soft water) Water supply and boosting (drinking water light chlorine water) Fertilization/metering system
Pump Model:
CMI: CMI type light horizontal multi-stage centrifugal pumps
2: rated flow m3/h
5: number of stage
T: means three phase, without T single phase
A: pump amend code, “A” standard one
W: Connection Type of pipeline: “W” female thread, “B” NPT thread, “N” special thread
G: code of materials: “G” stainless steel SUS304, “S” stainless steel SUS316, “X” other special materials.
BABE: shaft seal code:
B: “B” the rubber place shaft seal, “D” direct drive type mechanical seal
AB: “U” tungsten carbide, “Q” silicon carbide, “A” ceramic, “B” carbon
E: “E” EPDM, “V” fluorine rubber, “N” NBR
- INSTALLATION
Do not install the pump in the sun baked or wet place. Install the pump to near the water source as short as possible to have a shortest suction pipe and prevent from reducing the suction. Position the pump using the brackets. Install the pump in dry and ventilated place to ensure safe operation.
Try to reduce the bend in pipe circuit as you can, the gradient should less than 2%.
ELECTRIC CONNECTION
Danger:
Ensure the voltage (V), frequency (Hz), phase (PH) is conform with the ones marked on the label. When the Voltage 10%, it will make the inset thermal protector operate and the motor
stop operating.
The cord should meet the requirements of current.
Make sure the correct electric connection according to the wiring diagram.
English
Arabic
French
German
Indonesian
Italian
Portuguese
Spanish
Turkish